The Telemecanique XUK0ARCTL2 is an XUK multimode photoelectric sensor in a compact 50 x 50 housing with a relay output and a 2 m cable. One part covers thru beam, polarised reflex, diffuse and diffuse with background suppression, and it is self-teaching. It runs on 24 to 240 V AC or DC.

Technical specifications:

• Commercial reference: XUK0ARCTL2
• Manufacturer: Telemecanique
• EAN: 3389110160420
• Series / range: Telemecanique Photoelectric sensors XU
• Series name: General purpose multimode
• Sensor type: Photo-electric sensor
• Sensor name: XUK
• Sensor design: Compact 50 x 50
• Detection system: Multimode
• Maximum sensing distance: 35 M thru beam; 0.28 M diffuse with background suppression; 1.2 M diffuse; 5.7 m polarised reflex
• Type of output signal: Discrete
• Discrete output function: 1 NO or 1 NC programmable
• Output type: Relay
• Wiring technique: 5-wire
• Electrical connection: Cable
• Cable length: 2 m
• Rated supply voltage [Us]: 24…240 V AC; 24…240 V DC
• Supply voltage limits: 20…264 V AC; 20…264 V DC
• Switching capacity: 3 A (cos phi = 1 for 0.5 million cycles at 1 operating cycle per second at 250 V)
• Maximum power consumption: 3 W AC/DC
• Switching frequency: <= 20 Hz
• Maximum voltage drop: <1.5 V (closed state)
• Time delay range: 0…10 s monostable, on-delay or off-delay (programmable) delay
• Setting up: Self-teaching
• Status LED: 1 LED (green) for supply; 1 LED (red) for instability; 1 LED (yellow) for output state
• Enclosure material: PBT
• Width: 18 mm
• Height: 50 mm
• Depth: 50 mm
• Net weight: 0.175 kg
• IP degree of protection: IP65 double insulation conforming to IEC 60529
• Ambient air temperature for operation: -25…55 C
• Ambient air temperature for storage: -40…70 C

Features and benefits:

• One multimode sensor covers four detection modes, reducing what has to be stocked
• Self-teaching setup, so no manual sensitivity adjustment is needed
• Relay output switches up to 3 A, so a load can often be driven directly
• Wide 24 to 240 V AC or DC supply suits both control and mains voltage panels
• Programmable on-delay or off-delay timer up to 10 seconds is built in

Applications:

• Object detection and counting on conveyors and packaging lines
• Long range thru beam detection up to 30 m across an opening
• Presence detection where the supply voltage is mains rather than 24 V DC

Also known as: Telemecanique XUK0ARCTL2, XUK0ARCTL2 OsiSense XU photoelectric sensor, XUK multimode sensor.