This is an E-Ink raw display, 5.83inch, 648×480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

No backlight, keeps displaying last content for a long time even when power down

Ultra low power consumption, basically power is only required for refreshing

Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Package Content

5.83inch e-Paper (B) x1

Resources
Wiki

FAQs:

Q: What is the resolution of the 5.83-inch E-Ink Raw Display?
A: The display has a resolution of 648×480 pixels.
Q: What are the display colors of the 5.83-inch E-Ink Raw Display?
A: The display is a dual-color e-paper display, meaning it can show black and white content.
Q: What interface does the 5.83-inch E-Ink Raw Display use for communication?
A: The display uses a SPI interface for communication with a microcontroller or other device.
Q: Does the 5.83-inch E-Ink Raw Display come with a PCB (Printed Circuit Board)?
A: No, the display is a raw display panel without a PCB. You will need to provide your own controller board or interface to use it.
Q: What are the typical applications of the 5.83-inch E-Ink Raw Display?
A: The display is commonly used in e-readers, electronic shelf labels, smart tags, and other applications where low power consumption and a paper-like reading experience are desired.